DSE3110 MANUAL & AUTO START CONTROL MODULE

KEY FEATURES

• Back-lit icon LCD display
• Front panel editing
• LED and LCD alarm indication
• Power Save mode
• CAN and Magnetic Pick-up/Alt.
versions available (specify on
ordering)
• PC configurable
• 6 Digital inputs
• 4 Outputs (2 configurable on
Magnetic Pick up/Alt., 4
configurable on CAN version)
• Configurable timers and alarms
• Alternative configuration
• Remote Start input
• Generator voltage display
• Generator frequency display
• Battery voltage display
• Engine speed display
• Hours counter
• Engine pre-heat
• Comprehensive shutdown or
warning on fault condition
KEY BENEFITS
• Tamper-proof hours counter
provides accurate information
for monitoring and maintenance
periods
• Multiple engine parameters are
monitored simultaneously
• Module can be configured to
suit individual applications
• Suitable for engine only
applications
• Compatible with a wide range
of CAN engines
• Uses DSE Configuration Suite
PC software for simplified
configuration
• IP65 rating (with optional
gasket) offers increased
resistance to water ingress
• Licence-free PC software
RELATED MATERIALS
TITLE PART NO’S
DSE3110 Installation Instructions 053-050
DSE3110 Quick Start Guide 057-104
DSE3110 Operator Manual 057-086
DSE3110 Configuration Suite PC Software Manual 057-087
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries
CHARGE FAIL/ EXCITATION
8 V to 35 V fixed power source 2.5 W
NOMINAL STANDBY CURRENT
23 mA at 12 V, 18 mA at 24 V
MAXIMUM OPERATING CURRENT
35 mA at 12 V, 30 mA at 24 V
OUTPUTS
OUTPUT A (FUEL)
2 A DC at supply voltage
OUTPUT B (START)
2 A DC at supply voltage
AUXILIARY OUTPUTS C,D
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
DIMENSIONS
OVERALL
98 mm x 79 mm x 40 mm
3.9” x 3.1” x 1.6”
PANEL CUT-OUT
80 mm x 68 mm
3.1” x 2.7”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
DSE3110
MANUAL & AUTO START CONTROL MODULE
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649
VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change
the details shown on this data sheet without prior notice. The contents are intended for guidance only.

DSE4510/20 AUTO START AND AUTO MAINS FAILURE CONTROL MODULES

The DSE4510 Auto Start Control
Module and the DSE4520 Auto
Mains (Utility) Failure Control Module
are suitable for a wide variety of
single gen-set applications.
Whilst maintaining functions included
within higher end controllers, such as
generator or load power monitoring,
the DSE45xx range of especially
compact controllers provide the user
with the ultimate size to feature ratio.
Monitoring engine speed, oil
pressure, coolant temperature,
frequency, voltage, current, power
and fuel level, the modules will give
comprehensive engine and alternator
protection. This will be indicated on
the largest back-lit LCD icon display
in its class via an array of warning,
electrical trip and shutdown alarms.
Electronic J1939 (CAN) and nonelectronic
(alternator sensing) engine
support for diesel, gas and petrol
engines all in one variant. With a
number of flexible inputs, outputs
and protections, the modules can be
easily adapted to suit a wide range of
applications including lighting towers
with the added option for staged
loading outputs.
Through USB Communication both
modules can be easily configured
using the DSE Configuration Suite
PC Software or can be fully
configured through the module's
fascia.
All DSE products are supported by
the DSE global technical support
team which gives our customers and
end users access to 24 hour system
help and advice.